精华公布栏

发信人: killest (矛盾), 信区: NTM
标  题: 国外特种加工技术最新进展[8]
发信站: 紫丁香 (Sun Jan  9 12:52:13 2000), 转信

参考文献

1. T. Masuzawa, M. Fujino, K. Kobayashi. Wire Electro-Discharge Grinding
for Micro-Machining. Annals of the CIRP. 1985, 34(1)：431-434
2. Yu Zuyuan. Three Dimensional Micro-EDM Using Simple Electrodes.
Dissertation Subfmitted for the Degree of Doctor of Engineering at the
University of Tokyo. 1997.10
3. Zuyuan Yu, Takahisa Masuzawa, Masatoshi Fujino. 3D Micro-EDM with
Simple Shape Electrode. Part 1: Machining of Cavities with Sharp Corners
and Electrode Wear Compensation. International Journal of Electrical
Machining. 1998, 3: 7-12
4. 4.Zuyuan Yu, Takahisa Masuzawa, Masatoshi Fujino. 3D Micro-EDM with
Simple Shape Electrode. Part 2: Machining and Error Analysis of
Conical and Spherical Cavities. International Journal of Electrical
Machining. 1998, 3:71-78
5. T.Masuzawa. Three-Dimensional Micro-machining by Machine Tools. Key
Notes of CIRP Annuals,1997.8 Tanjin
6. 汤泽隆，真柄卓司. 小电极を用いた创成放电加工（第2报）. 型技术.
1997, 12(8): 104-105
7. 增泽隆久. 放电加工. 精密工学会誌.Vol.57(1991). No.6:31-35
8. G.Walde. New Technologies and EDM. ISEM XII.(1998): 331-340
9. 冈田晃，冈本康宽，宇野义幸，渡部晃次，田中英登，冈田三郎. 三角形断面
电极による复杂形状放电加工法. 精密工学会誌. Vol.65(1999), No1,155-159
10. Masanori Kunieda, Masahiro Yoshida. Electrical Discharge Machining
in Gas. Annals of the CIRP Vol.46(1997), 1, 143-146
11. 国枝正典，吉田政弘. 気中放电加工. 精密工学会誌. Vol.64(1998), No12,
1735-1738
12. J.P.Kruth, J.Van Humbeeck, L.Stevens. Micro Structural Investigation
and Metallographic Analysis of White Layer of a Surface Machined by
Electro Discharge Machining(ISEM-11),Lausanne, Switzerland. Presses
Polytechniques Et Universitaires Romandes. Lausanne, Switzerland, 1995:
849-862
13. 毛利尚武，斋藤长男，成宫久喜，河津俊秀．粉末混入加工液による放电仕上
加工．电気加工学会誌，1991, 25(49):47-60
14. N.Mohri, N.Saito, M.Higashi. A New Process of Finish Machining on
Free Surface by EDM Methods. Annals of CIRP,1991,40(1):207-210
15. Yoshiyuki UNO, Akira OKADA, Yasuhiro HAYASHI and Yoshiaki TABUCHI.
Surface Modification by EDM with Nickel Powder Mixed Fluid.
International Journal of Electrical Machining,1999,4,(1):47-52
16. Wong Y S, Lim L C, Iqbal Rahuman, Tee W M. Near-mirror-finish
Phenomenon in EDM Using Powder-mixed Dielectric. J. Mater. Process
Technology,1998,79(1):30-40
17. Biing Hwa Y, Sung Long C. Characteristics of SKD11 by Complex
Process of Electrical Discharge Machining Using Liquid Suspended with
Alumina Powder. J. Japan Inst. Metals,1994,58(9): 1067-1072
18. Buffalo Grove. High-speed Mirror Surface Finishing. EDM Technology,
1994,2:30-33
19. 林义生．粉末混入放电加工机と精密加工．型技术,1997,12(8):92-93
20. 和田光悦，藤昭弘，真柄卓司. Si粉末混入放电加工高品位加工. 型技术.
1996, 11(8): 116-117
21. 菅井诚. 粉末添加液による放电加工面特性. 型技术. 1995, 10(7):
122-123
22. Ming Q Y, He L Y. Powder-suspension Dielectric Fluid for EDM. J.
Mater. Process Technology,1995,52(1):44-54
23. 菅井诚．放电加工における加工面の光沢性とワーク材料の关系．电気加工学
会全国大会(1995)讲演论文集:59-62
24. T.Masuzawa, T.Takawashi. Recent Trends in EDM/ECM Technologies in
Japan. ISEM12(1998), 1-15
25. Y.Fukuzawa, T,Tani, Y.Ito, Y.Ichinose, N.Mohri. Electrical Discharge
Machining (EDM) of Insulating Ceramics with a Sheet of Metal Mesh.
ISEM11(1995), 173-179
26. N.Mohri, Y.Fukuzawa, T,Tani, N.Saito, K.Furutani. Assisting
Electrode Method for Machining Insulating Ceramics. Annals of the CIRP,
45,1(1996)201-204
27. Y.Fukuzawa, N.Mohri, T,Tani. Electrical Discharge Machining
Phenomena of Insulating Sialon Ceramics with an Assisting Electrode.
IJEM, No2(1997)25-30
28. Y.Fukuzawa, H.Katougi, N.Mohri, K.Furutani T,Tani. Machining
Properties of Insulating Ceramics with an Electric Discharge
Machining-Machining of the Oxide Ceramics. ISEM12(1997), 445-454
29. 福泽康, 毛利尚武. 绝缘性セラミツスの放电加工. 精密工学会誌. Vol.
64(1998), No12,1731-1734
30. K.P.Rajurkar, D.M.Ghodke, W.M.Wang, W.S.Zhao. Abrasive
Electrodischarge Grinding of Silicon Nitride. ISEM12 (1997)475-484
31. Y.P.Singh, Vijay K.Jain, Prashant Kumar, D.C.Agrawal. Machining
piezoelectric (PZT) ceramics using an electrochemical spark
machining(ECSM) process. J. Mater. Process Technology, 58(1996): 24-31
32. D.K. Aspinwall, Mike L. H. Wise, etc. Electrical Discharge
Texturing. Int. J. Mach. Tools Manufact. Vol. 32(1992), No 1/2.
pp183-193
33. N. Saito, N.Mohri, T.Takawashi, T.Magara, A.Goto, K.Watanabe, M.
Suzuki. Conductive Ceramics Coating Technology Using EDM on Metal
Surface(Surface Modification by Means of Electrical Discharge
Machining). ISEM12(1997), 455-463
34. 毛利尚武，斋腾长男. 表面改质放电加工. 精密工学会誌. Vol.64(1998),
No12,1715-1718
35. T. Tamura. Surface Modification of Cemented Carbides Machined by EDM
Using Oxidizing Treatment. ISEM12 (1997), 485-492
36. H. Tsukahara, H. Minarmi, K. Masui, K. Demizu, T. Sone. Surface
Modification of Titanium using EDM Process. ISEM12 (1997), 493-502
37. H. Minami, K. Masui, H. Tsukahara, H. Hagio. Coloring Method of
Titanium Alloy using EDM Process. ISEM12(1997), 503-512
38. M.Simao, David K.Aspinwall, Mike L.H.Wise. Electrical discharge
texturing of cold mill work rolls using different tool electrode
materials. Iron and Steel Engineer. 1996.3 pp 42-47
39. M.Simao, David K.Aspinwall. Electrical Discharge Texturing of Mill
Rolls and the Effect of Hard Chromium Plating/TiN Coating on Roll
Surface Topography and Integrity. VDI BERICHTE. 1998.5 359-368
40. D.K. Aspinwall, Mike L. H. Wise, etc. Electrical Discharge
Texturing. Int. J. Mach. Tools Manufact. Vol. 32(1992), No 1/2.
pp183-193
41. M. Jennes, R. Snoeys, W. Dekeyser. Comparison of Various
Approaches to Model the Thermal Load on the EDM-Wire Electrode. Annals
of the CIRP. 1984, 33(1):93-98
42. B. M. Bikhman, M. V. Korenblyum. Adaptive Control of the Operating
Mode in Electric Discharge Cutting to Protect the Wire Electrode from
Breaking. ISEM-8, Miskva, Tussia, 1986:83-85
43. N. Kinoshita, M. Fukui, G. Gamo. Control of Wire-EDM Preventing
Electrode from Breaking. Annals of the CIRP. 1982, 31(1):111-114
44. R. Snoeys, D. Danw, F. Staelens. Adaptive Control Optimization as
Basis for Intelligent EDM Die Sinking Machines ASME. 1986, 22:63-78
45. K. Kobayashi. The Present and Future Developments of EDM and ECM.
11th International Symposium for Electromachining(ISEM). EPFL, Lausanne,
Switzerland. April 17-21, 1995:29-47
46. Seiji Niwa, Masanori Furuya. A Study on Optimum Machining Conditions
in EDM Process for Making Molds and Dies. 11th International
Symposium for Electromachining(ISEM). EPFL, Lausanne, Switzerland. April
17-21, 1995:325-332
47. F. Klocke, R. Raabe, G. Wiesner. Optimization of the EDM Sinking
Process Using Neuro-fuzzy Control. 12th International Symposium for
Electro-machining(ISEM). VDI-Gesellschaft Produktionstechnik(ADB),
Aachen., Germany. May 11-13, 1998:163-172
48. Hans Kurt Tonshoff, Ferdinand von Alversleben, Andreas Ostendorf.
Micro-machining of Metals Using Ultrashort Laser Pulses. International
Journal of Electrical Machining. 1999, 4: 1-6
49. B.Snaith, S.D.Probert. Characterization of Laser-Textured
Cold-Rolled Steel Sheets. Wear. 109(1986) 87-97
50. T. Tamura. Surface Modification of Electrical Discharge Machined
Surfaces by CO2 Laser. International Journal of Electrical Machining.
1998, 3: 47-52
51. P. Loosen, R. Poprawe. Laser Machining of Metal - State of the Art
and Recent Development. Proceedings of ISEM-12, 1998: 17-32
52. J.P. Kruth, H.K. Tonshoff, F. Klocke. Surface and Sub-Surface
Quality in Material Removal Processes for Tool Making. Proceedings of
ISEM-12, 1998: 33-64
53. F. Klocke. The Process Sequence in Tool and Diemaking. Proceedings
of ISEM-12, 1998: 64-98
54. T.B.Thoe, D.K.Aspinwall, M.L.H.Wise. Review on Ultrasonic Machining.
International Journal of Machine Tools & Manufacture. Vol.38(1998),
No4: 239-255
55. Z.J.Pei, P.M.Ferreira. An Experimental Investigation of Rotary
Ultrasonic Face Milling. International Journal of Machine Tools &
Manufacture. Vol.39(1999): 1327-1344
56. Rajurkar.K.P., Wang.Z.Y., Kuppattan.A. Micro removal of ceramic
material (Al2O3) in the precision ultrasonic machining. Precision
Engineering. Vol23(1999) No2: 73-78
57. Sun, Xi-Qing; Masuzawa, T.; Fujino, M. Micro ultrasonic machining
and its applications in MEMS Physical Proceedings of the 1996 9th
International Workshop on Micro Electro Mechanical System, MEMS-96 Feb
11-15
58. Komaraiah, M.; Reddy, P. Narasimha A study on the influence of
workpiece properties in ultrasonic machining International Journal of
Machine Tools & Manufacture Vol33(1993) No3:495-505
59. Rajurkar, K. P., Zhu, D., MeGeough, J. A., Kozak, J., De Silva, A.,
1999, New Development in ECM, CIRP-99, Keynote paper, Vol. 48/2
60. Risko, D. G., 1990, Electrochemical Machining Innovations Solution
for Higher Productivity, SME Advanced Manufacturing Technology III,
MR90-244.
61. Zhu, D., and Yu, C. Y., 1992, Investigation on the Design of Tool
Shape in Electrochemical Machining, ASME PED Vol. 58 : 181-190.
62. Datta, M., 1989, Jet and Laser-Jet Eelectrochemical
Micro-machining of Nickel and Steel, Electrochem Soc., Vol. 136, No.8:
2251-2256.
63. Yun, N. Z., Wei, B., Yang, X. Y. and Xu, J. W., 1989,
Investigation on Application of Electrochemical Contour Evolution
Machining, Proceed.  ISEM-9: 143-145.
64. Ohmori, H. and Nakagawa, T., 1997, Utilization of Nonlinear
Conditions in Precision Grinding with ELID (Electrolytic in-Process
Dressing) for Fabrication of Hard Material Components, Annals of the
CIRP, Vol. 46/1: 261-264.

--

                  oo
         il    bb    yy   il      ..... 与尔同消万古愁
        i    bbb  ll  yyy   i
     iii       bb    yy      iii
                  oo

※ 来源:．紫丁香 bbs.hit.edu.cn．[FROM: victor.hit.edu.c]